Ricoh FV-G030B1 manual 4Communication Protocol, 4.1Communication Method, 4.2Communication Settings

4Communication Protocol

This camera has a communication function that enables external devises, such as a PC, to control the camera’s functions.

Please use the “R-GigE-Software” communication software, or the following communication protocol to communicate to the camera:

4.1Communication Method

UART（RS232C）,binary communication

4.2Communication Settings

	Settings
Baud Rate	115,200 bps
Data Bit	8 bit
Parity	None
Stop Bit	1 bit
Flow Control	None

4.3Communication Format

The Sending data format from the PC to the camera is as follows:

SOF	Device	Read/Write	Page	Command	Data	Data	EOF
	Code		Selection	Code	Length
(8bit)	(6bit)	(1bit)	(1bit)	(8bit)	(8bit)	(R: 1 byte, dummy)	(8bit)
						(W: n bytes)

The Receiving Data format from the camera is as follows:

￿ After sending the Write Command:

SOF	Data Length	Receiving Code	EOF
(8bit)	(8bit) “00H”	(1 byte)	(8bit)

￿ After sending the Read Command:

SOF	Data Length	Data	EOF
(8bit)	(8bit)	(n bytes)	(8bit)

FV-G030B1	18/38
User’s Guide Rev. 1.02