Ricoh FV-G030B1 4.4Camera Control Command, 4.4.1Camera Command List Device Code, User’s Guide Rev

4.4Camera Control Command

￿The data unit of the each command is 1 byte (8bit).

￿The data can be saved to the EEPROM if there is an “X” in the “Save to EEPROM” column in the following list.

￿The camera initializes based on the stored data in the EEPROM when the power is applied.

4.4.1Camera Command List (Device Code: 000000)

Device Code = 000000

Command	R/W	Save to	Function		Initial Data		Data Range
No.		EEPROM
00 to 0FH			Reserved	-		-
10H	R/W	x	camera function mode 1 (8bit: D[7..0])		89H
11H	R/W	x	camera function mode 2 (8bit: D[7..0])		0FH
12H	R/W	x	camera function mode 3 (8bit: D[7..0])		00H
13H	R/W	x	camera function mode 4 (8bit: D[7..0])		60H
14 to 15H			reserved	-		-
16H	R/W	x	software trigger mode (8bit: D[7..0])		80H
17H	R/W	x	image data reset (8bit: D[7..0])		00H
18H			reserved	-		-
19H	R/W	x	image output format (8bit: D[7..0])		01H
1A to 1FH			reserved	-		-
20H	R/W	x	exposure time (us) of the electronic shutter (24bit: D[7..0])				0 to
				0
21H	R/W	x	exposure time (us) of the electronic shutter (24bit: D[15..8])
						16,777,215
22H	R/W	x	exposure time (us) of the electronic shutter (24bit: D[24..16])
23 to 2FH			reserved	-		-
30H	R/W	x	CDS gain (8bit: D[7..0])	0			0 to 255
31H	R/W	x	digital gain (8bit: D[7..0])		factory	-
					adjusted
32H	R/W	x	gain offset (8bit: D[7..0])			-
					value
33 to 37H			reserved	-		-
38H	R/W	x	clamp level (8bit: D[7..0])	9			0 to 31
39 to 3DH			reserved	-		-
3EH	R/W	x	white clip for the test pattern (16bit: D[15..8])	4,095			0 to 4,095
3FH	R/W	x	white clip for the test pattern (16bit: D[7..0])
40 to 4FH			reserved	-		-
50H	R/W	x	trigger delay time (us) (Integer) (24bit: D[7..0])
51H	R/W	x	trigger delay time (us) (Integer) (24bit: D[15..8])	0			0 to
						2,000,000
52H	R/W	x	trigger delay time (us) (Integer) (24bit: D[23..16])
53H	R/W	x	trigger delay time (us) (Decimal) (8bit: D[7..0])
54H	R/W	x	strobe signal delay time (us) (Integer) (24bit: D[7..0])
55H	R/W	x	strobe signal delay time (us) (Integer) (24bit: D[15..8])	0			0 to
						2,000,000
56H	R/W	x	strobe signal delay time (us) (Integer) (24bit: D[23..16])
57H	R/W	x	strobe signal delay time (us) (Decimal) (8bit: D[7..0])

FV-G030B1	21/38
User’s Guide Rev. 1.02