Manuals / Ricoh / Household Appliance / Home Security System

Ricoh FV-G030B1 manual 3.3Edge Preset Trigger Mode, 3.3.1Timing, User’s Guide Rev, 13/38

Models: FV-G030B1

1 38

Page 13

3.3Edge Preset Trigger Mode

In this “edge preset trigger mode”, the camera exposure starts at the rising edge of the trigger signal like the “pulse width trigger mode” in the previous sections. However, in this mode, the exposure duration time is based on the preset value stored by the by the camera setting communication.

3.3.1Timing

*Note. 1

Max. 1H

Trigger signal (Rising edge)

Internal VD

	*Note. 2
	Exposure
CCD exposure	time
Video out

FVAL

Note 1: The video output will be V reset by the next internal HD signal immediately after the exposure is finished.

Note 2: The exposure time is set by the preset electronic shutter speed.

	FV-G030B1	13/38
	User’s Guide Rev. 1.02	13/38
	User’s Guide Rev. 1.02

Page 13

Image 13

Ricoh FV-G030B1 manual 3.3Edge Preset Trigger Mode, 3.3.1Timing, User’s Guide Rev, 13/38

Contents

User’s Guide GigE Vision VGA Monochrome CCD Camera FV-G030B11/38 Connector Specifications Table of ContentsCamera Operational Modes Communication Protocol1.1RJ45 Connector 1Connector SpecificationsFV-G030B1 User’s Guide Rev1.3Power-I/OConnector 1.2DC Iris Lens ConnectorFV-G030B1 User’s Guide Rev5/38 HR10A-7R-6PBHIROSE LVAL 2Camera Output Timing ChartsDVAL FVALFVAL LVAL DVALVideo out FVALOptical black Optical black + Dummy bit CCD effective linesBlanking Front Effective lines Blanking Back 9/38FV-G030B1 2.3Pixel Transferring ImageUser’s Guide Rev 10/383.1Normal Mode 3Camera Operational Modes3.2Pulse Width Trigger Mode 3.2.1TimingInput Trigger signal 3.3.1Timing 3.3Edge Preset Trigger ModeFV-G030B1 User’s Guide RevInput Trigger signal Trigger signal FV-G030B1 3.4.1TimingUser’s Guide Rev 15/38Input Trigger signal Trigger signal FV-G030B1 3.5H Reset ModeUser’s Guide Rev 17/384.2Communication Settings 4Communication Protocol4.1Communication Method 4.3Communication FormatDescriptions Name19/38 20/38 4.4.1Camera Command List Device Code 4.4Camera Control CommandFV-G030B1 User’s Guide Rev22/38 CommandSave to FunctionFV-G030B1 4.4.2Camera Command List Device CodeUser’s Guide Rev 23/3824/38 User’s Guide Rev FV-G030B125/38 26/38 27/38 28/38 User’s Guide Rev 29/3830/38 User’s Guide Rev FV-G030B131/38 32/38 33/38 34/38 GenICam command Camera commandCommand FV-G030B136/38 37/38 38/38