JVC TM-2100PN-K manual How To Initialise The Setting, Press the Power Switch to turn the power OFF

HOW TO INITIALISE THE SETTING

SCREEN DISPLAY AND SELECTIONS IN THE <SET-UP MENU> RESET MODE

You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and the volume level to their factory-set (initial) values.

1.Press the Power ( ) Switch to turn the power OFF (—).

ON

OFF

POWER

2.While pressing both MENU button and PHASE ( ) button, press the Power ( ) switch to turn the power

ON (_).

The <SET-UP MENU> RESET screen is displayed.

	ON	Note:
	OFF
PHASE MENU	POWER	● The <SET-UP MENU> PRESET screen will not be
		displayed if the MENU or PHASE buttons are pressed
		for a very short time. Keep pressing them until the
		display screen appears.

3.Setting

Initialisation is required.

	Press the CONTRAST ( ) button.
	* Initialisation is completed, and the <SET-UP MENU>
CONTRAST	RESET screen disappears.

Initialisation is not required.

–	+	Press the VOLUME/SELECT [+] or [–] button.
		* Initialisation is aborted, and the <SET-UP MENU>

RESET screen disappears.

VOLUME/SELECT

<SET-UP MENU> RESET screen

<SET–UP MENU> RESET

Are	you	sure ?
“Yes”	then	<CONTRAST>
“No”	then	<+> or <–>

Initial settings

Sorts		(setting)
	Functions (Items)	Initialisation
screen	COLOR TEMP.	6500
<MENU>	SHARPNESS	00
	BRIGHTNESS P.S.	OFF
	COLOR SYSTEM	AUTO
	ASPECT RATIO	4–3
	H. POSITION	00
screen	V. POSITION	00
	R. CUT OFF	00
MENU>	WHITE BALANCE
	R. DRIVE	00
	G. CUT OFF	00
	B. CUT OFF	00
UP	G. DRIVE	00
<SET-	B. DRIVE	00
	CONTROL LOCK	OFF
	B.P.S. LEVEL	10
	REMOTE SELECT	OFF
adjustment	PHASE	00
	CHROMA	00
Picture	CONTRAST	00
	BRIGHT	00
Volume	VOLUME	20

10

LCT0054-002A-H 10 02.07.25, 3:45 PM