JVC TM-2100PN-K manual HOW to USE the Menu Functions, Press the Menu button

HOW TO USE THE MENU FUNCTIONS

DISPLAY AND SELECTION IN THE <MENU> SCREEN MODE (SETTING)

You can set the following menu items.

Set them depending on your needs.

• SHARPNESS	• ASPECT RATIO
• COLOR TEMP.	• BRIGHTNESS P.S.

•COLOR SYSTEM

1. Press the MENU button.

The <MENU> screen is displayed.

	<MENU> screen
1	< MENU >

‰SHARPNESS COLOR TEMP. COLOR SYSTEM ASPECT RATIO BRIGHTNESS P.S.

2

EXIT

:00

:6500

:AUTO

:4–3

:OFF

3

4

MENU

2.Press the PHASE ( ) or CHROMA ( ) button to select MENU items.

	A selection mark (3) is put next to the selected item.
PHASE CHROMA	Front panel		Function	Contents
	button		displayed
SHARPNESS
COLOR TEMP.	PHASE (	)	▼	Forwards selection mark (3)
COLOR SYSTEM	CHROMA (	)	5	Reverses selection mark (3)

ASPECT RATIO

BRIGHTNESS P.S.

3. Press the VOLUME/SELECT buttons to set.

–

+

Front panel

Function

Contents

button

displayed

VOLUME/SELECT

VOLUME/

+

Increases (to max. value)

SELECT (+)

3

Forwards the setting value

VOLUME/

–

Decreases (to min. value)

SELECT (–)

2

Reverses the setting value

Menu items

Purpose

Setting range

SHARPNESS

Picture sharpness

00

+1

+2

+3

+4

+5

COLOR TEMP.

Colour temperature of

6500

9300

white balance

COLOR

Colour system

AUTO

NTSC

AUTO

PAL

SYSTEM

ASPECT RATIO

Aspect ratio

4 – 3

16 – 9

BRIGHTNESS

Brightness Peak

OFF

ON

P.S.

Suppressor function

*Normally set the COLOR SYSTEM to the AUTO mode. If reception in the AUTO mode is not good, set it to the exclusive mode (NTSC or PAL) corresponding to the received colour system.

4.If you want to set the other menu items, repeat procedures 2 and 3.

5.Press the MENU button to quit.

Front panel	Function	Contents
button	displayed
MENU		Quits (or Releases) the
MENU	EXIT
		<MENU> screen

– +

PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT

<Front panel button>

1Selection mark (3): Indicates the menu item you select.

2Menu item: Menu items you can

select.

3Setting display: Indicates the current settings (value).

4Function display: The functions of the front panel buttons (7 buttons on the left.) correspond to the function displayed.

Function	Contens
displayed
▼	Forwards the menu item
5	Reverses the menu item
–	Lowers the adjustment
	value (to the minimum)
+	Raises the adjustment
	value (to the maximum)
3	Forwards the setting value
2	Reverses the setting value
EXIT	Exits the <MENU> screen

Notes:

●BRIGHTNESS P.S. (or B.P.S.) stands for Brightness Peak Suppressor. This function is used to suppress (cut) the white peak portion of the picture, so as to reduce the picture’s burning on the screen (cathode ray tube).

●When the BRIGHTNESS P.S. (or B.P.S.) function is ON, the suppressed white peak portion (for example, the lit part of a fluorescent lamp) seems to be blurred.

If required, lower the setting for the B.P.S. LEVEL in the <SET- UP MENU> screen mode, or turn off the BRIGHTNESS P.S. function.

●When the screen aspect ratio is set to 16-9 (16:9) the picture will be vertically reduced.

●If REMOTE is displayed in the ASPECT RATIO or BRIGHTNESS P.S. setting values in the <MENU> screen, REMOTE SELECT is set to “ASPT” or “B.P.S.” in the <SET-UP MENU> screen. In this case, it is not possible to adjust the setting ranges for ASPECT RATIO and BRIGHTNESS P.S.

If you need to make adjustments, use the external control function or turn off the REMOTE SELECT setting.

7

LCT0054-002A-H 7 02.07.25, 3:44 PM