The following options appear in the display:

Voice Commands — Lets you place calls, access the Contacts List, review appointments, and more by speaking commands into the phone. (Also see “Making a Call — Voice Dialing” on page 18 and “Voice Method” on page 30 for more information.)

Voice Settings — Lets you adjust VoiceSignal settings.

2.Select the desired sub-menu.

Voice Commands

To start VoiceSignal, do one of the following:

In Standby mode, press and hold .

Say a Command” appears in the display and is pronounced through the earpiece, followed by a list of available commands.

At the Tools menu, select Voice SVC Voice Command.

Note: You can set the phone to start VoiceSignal when you open the phone. (For more information, refer to “Voice Launch” on page 71)

VoiceSignal includes the following commands:

Call — Lets you dial the phone by saying any name stored in the contact list, without ever having to record, or “train” that name. VoiceSignal automatically voice-activates all the contacts, even if you have hundreds of them stored on the phone. You can also dial any telephone number, even if it is not stored in the contact list, by saying the digits in the number. (For more information, refer to “Making a Call — Voice Dialing” on page 18.)

Send Text — Lets you launch the Create Txt Msg screen. (For more information, refer to “Creating and Sending a Text Message” on page 38.)

Send Picture — Lets you launch the Create Pic Msg screen. (For more information, refer to “Creating and Sending a Picture Message” on page 39)

Lookup — Lets you look up and display contact information for any name stored in the Contacts list by saying the name. (For more information, refer to “Finding a Contacts Entry” on page 30.)

Go to — Lets you access all of the Main Menus on the phone.

Check — Lets you check the phone's status (that is, network coverage, signal strength, and battery in the same report), network coverage, signal strength, battery, and phone number.

Note: Speaking clearly, say the command that you want to use.

If, after a few seconds, the device has not recognized a command, it prompts you to repeat the command.

If, after a few more seconds, it still has not recognized a command, it tells you “Sorry, no match found,” and cancels voice recognition.

Voice Command Tips:

Make sure you wait for the beep before speaking.

Speak clearly at a normal volume, as if you were talking on the phone.

Tools 68

Page 71
Image 71
Samsung GH68-26097A user manual Following options appear in the display, Select the desired sub-menu, Voice Commands