18

Checking signal strength and

channel strength (DVB-T/T2/C/S*/

S2*)

If you install a DVB-T/T2/C/S/S2 antenna for the first
time or relocate it, you should adjust the alignment
of the antenna to receive a good reception while
checking the antenna setup screen.
* 857 series only

1Go to TV Menu > Setup > View setting >

Channel settings > Antenna setup-DIGITAL.

2Press a/b to select Digital setup or Satellite

setup, and then press ;.
EChecking signal strength

3Press a/b to select Signal strength, and then

press ;.
Signal strength for DVB-T/T2/C
Supply voltage
CH No.
Current Max.
Signal strength
Signal strength
Channel strength
Current Max.
Quality
Signal strength for DVB-S/S2
Current Max.
Signal strength
Signal strength
Channel strength
Current Max.
Quality
EChecking channel strength

4Press a/b to select Channel strength, and

then press ;.
You can input a specified frequency band using the
0_9 numeric buttons.
Channel strength of DVB-T/T2
Supply voltage
CH No.
Current Max.
Signal strength MHz
Signal strength
Frequency
Channel strength
Current Max.
Quality
Channel strength of DVB-C
Supply voltage
Current Max.
Signal strength MHz
Signal strength
Frequency
Symbol rate
QAM modulation
Channel strength
Current Max.
Quality
Channel strength of DVB-S/S2
Current Max.
Signal strength
MHz
Signal strength
Frequency
Symbol rate
Band
Channel strength
Current Max.
Quality
Vert/Low

5Position and align the antenna so that the

maximum possible values for Signal strength
and Quality are obtained.
NOTE
The values of Signal strength and Quality indicate
when to check the appropriate alignment of the
antenna.

Supplying power to the antenna

You must supply power to the antenna in order
to receive digitally/terrestrially broadcast stations
after connecting the antenna cable to the antenna
terminal on the rear of the TV.

1Go to TV Menu > Setup > View setting >

Channel settings > Antenna setup-DIGITAL >
Supply voltage.

2Press c/d to select On, and then press ;.

Initial auto installation