Grundig GLDCD1904WDVD, TR 1521 View the TV plays, View the AV signal sources DVD/VCR/CAMCORDER

2.The Picture setup, Sound setup, Previous channel can be memorized before you switch off the TV/Monitor. The TV/Monitor will re-start under the previous state when you switch on it again.

3.If you unplug the power cord to cut off the power supply completely, all previous setting will be lost.

4.Press the V - or V + button to adjust the volume output. Press the V - button repeatedly to decrease the volume; press the V + button repeatedly to increase the volume from 0 to 100.

5.Press the SLEEP button to display the preset time on the screen.

(2) View the TV plays.

1.Press the TV/AV button on the unit or the remote control to select the TV function mode. The TV will appear the initial channel ‘1’ on the top right corner when the function is on. Press the P- or P+ button to select the previous or next channels; or press the 0-9buttons to enter a channel number directly, or press the -/-- button until the screen display ‘--’ or ‘---’, then use the 0-9 numerical buttons to enter a channel number from 10 to 249.

2.Press the RECALL button on the remote control to select from the present channel and the previous channel.

3.Press the PP button to select video out mode from the below 4 types

User

Standard

Mild

Dynamic

4.Press the MUTE button to cut off the sound output, then the screen will show “ “ mark , press this button again to resume sound output..

5.Press the DISPLAY button to display the preset channel mode.

(3) View the AV signal sources (DVD/VCR/CAMCORDER)

Press the TV/AV button on the remote control, there will be a menu displayed on the screen as followed:

11