43
Analogue setting
You can reconfigure the analogue TV channels
settings automatically or manually.
EAdditional search
Use this menu to add new services automatically
after “Analogue search” in the “Auto installation”
menu has been completed.
• Start searching channels after selecting the colour
system and sound system.
E Manual adjust
Use this menu to set up analogue TV channels
manually.
After selecting “Yes” on the screen, press
a/b/c/d to select the channel you want to
set and then press ;.
Fine
You can adjust the frequency to the desired position.
NOTE
• Adjust while checking the background picture as a
reference.
• You can set by directly entering the frequency number
of the channel with 0_9 numeric buttons.
EXAMPLE
• 179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
• 49.25 MHz: Press 4 > 9 > 2 > 5 > ;.
Colour sys.
Select the optimum colour system to receive
(“Auto”, “PAL”, “SECAM”).
Sound sys.
Select the optimum sound systems (broadcasting
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
Label
When a TV channel sends its network name, the
“Auto installation” detects the information and
assigns a name to it. However, you can change
channel names individually.
Select each character of the new name for the
channel with using the software keyboard (Page 14).
NOTE
• The name can be five characters or less.
Skip
Channels with “Skip” set to “On” are passed over
when using :r/s even if selected while watching
the image from the TV.
Lock
You can block the viewing of any channel.
NOTE
• See “PIN” for setting a PIN.
• When “Lock” is set to “On” for a channel, “Child lock
has been activated” displays, and the image and sound
of the channel are blocked.
• When pressing 6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting
the correct PIN unlocks the “PIN” temporarily until the
power is turned off.
ESort
Channel positions can be sorted freely.
1Press c/d to select “Yes ”, and then press ;.
2Press a/b/c/d to select the channel you
want to move, and then press ;.
3Press a/b/c/d to move it to the desired
position, and then press ;.
4Repeat steps 2 and 3 until all desired channels
are sorted.
E Erase programme
Channels can be erased individually.
1Press c/d to select “Yes ”, and then press ;.
2Press a/b/c/d to select the channel you
want to erase, and then press ;.
• A message window pops up.
3Press c/d to select “Yes ”, and then press
; to erase the selected channel. All the
subsequent channels move up.
4Repeat steps 2 and 3 until all desired channels
are erased.
Basic adjustment