Fujitsu MPC3045AH manual Cable connector specifications, Specters Strip, Amp, Device connection

3.3.2Cable connector specifications

Table 3.2 lists the recommended specifications for the cable connectors.

Table 3.2 Cable connector specifications

	Name	Model	Manufacturer
	Cable socket	FCN-707B040-AU/B	Fujitsu
	(closed-end type)
ATA interface cable
	Cable socket
(40-pin, CN1)		FCN-707B040-AU/O	Fujitsu
	(through-end type)
	Signal cable	445-248-40	SPECTERS STRIP
	Cable socket housing	1-480424-0	AMP
Power supply cable
	Contact	60617-4	AMP
(CN1)
	Signal cable	AWG 18 to 24

Note :

The cable of twisted pairs and neighboring line separated individually is not allowed to use for the host interface cable. It is because that the location of signal lines in these cables is not fixed, and so the problem on the crosstalk among signal lines may occur.

3.3.3Device connection

Figure 3.8 shows how to connect the devices.

ATA interface cable Power supply cable

Disk Drive #0

Host system

DC

power supply

Disk Drive #1

Figure 3.8 Cable connections

3 - 8 C141-E056-01EN