Fujitsu manual Device Specifications Specifications summary, MPC3045AH MPC3065AH

1.2Device Specifications

1.2.1Specifications summary

Table 1.1 shows the specifications of the disk drive.

Table 1.1 Specifications

				MPC3045AH				MPC3065AH
Formatted Capacity (*1)				4551.96 MB				6510.55 MB
Number of Heads			4						6
Number of Cylinders						10,424 + 83
(User + Alternate & SA)
Bytes per Sector						512
Recording Method						8/9 PRML
Track Density						11,000 TPI
Bit Density					162,754 BPI
Rotational Speed					7,200 rpm ± 0.5%
Average Latency							4.17 ms
Positioning time
•	Minimum				2.0 ms typical
•	Average			(Read) 9 ms typical, (Write) 10 ms typical
•	Maximum			(Read) 18 ms typical, (Write) 19 ms typical
Start/Stop time
• Start (0 rpm to Drive				Typical:	8 sec., Maximum:				16 sec.
Read)				Typical:	20 sec.,Maximum:				30 sec.
• Stop (at Power Down)
Interface							ATA–3
				(Maximum Cable length: 0.46 m)
Data Transfer Rate
•	To/From Media			12.65 to 19.18 MB/s
•	To/From Host		16.7 MB/s Max. (burst PIO mode 4, burst DMA mode
						2),
				33.3 MB/s Max. (burst ultra DMA mode 2)
Data buffer							512 KB
Physical Dimensions				26.1 mm max. × 101.6 mm × 146.0 mm
(Height × Width × Depth)				(1.03” max. × 4.0” × 5.75”)
Weight							600 g
*1: Capacity under the LBA mode and the CHS mode.
	Under the CHS mode (normal BIOS specification), formatted capacity, number of
	cylinders, number of heads, and number of sectors are as follows.
	Model	Formatted Capacity		No. of Cylinder			No. of Heads		No. of Sectors
MPC3045AH		4551.96		9,408			15		63
MPC3065AH		6510.55		13,456			15		63

1 - 4 C141-E056-02EN