V . A S S E M B L Y

To reduce the possibility of shipping damage, your Jazzy 1100’s seat is removed from the power base, and the seatback is removed from the seat assembly before your Jazzy is shipped. The joystick may also have been removed from the armrest. The following is a set of instructions to help you quickly and easily prepare your Jazzy 1100 for immediate use.

Parts List

Quantity

 

 

Phillips-head seat back mounting screws

4

 

 

Seatback

1

 

 

8-in. wire ties

4

 

 

WARNING! Do not pick up the seat frame by the armrests. They are free to pivot, and you may lose control of the seat if they do so, resulting in personal injury or damage to the chair.

SEATBACK ASSEMBLY

The seatback mounts to the back hinges with four (4) Phillips-head screws. You may install the seat back be- fore or after you install the seat to the power base.

To mount the seatback to the hinge:

1.Line up the hinges with the holes in the seatback. See figure 11.

2.Insert the seatback mounting screws through the hinge and into the seatback.

3.Tighten the four screws.

SEAT INSTALLATION (SEAT WITH H-FRAME)The standard seat installation method incorporates the seat frame (H-frame) and four (4) adjustable seatposts located on the powerbase.

To install the seat:

1.Set the seat on the rear seat towers. See figure 12.

2.Push the seat back and down until the latches en- gage on the front seat towers. See figure 13.

3.Plug the controller cable into the connector on the utility tray. See figure 14.

4.Plug the power seat switch cable (if so equipped) into the connector on the utility tray.

5.Secure the controller cable to the armrest receiver with one or more wire ties.

CAUTION! Do not place the controller cable so that it can be pinched in the seat frame or the power base frame.

ATTACH SEATBACK HERE

Figure 11. Seatback Assembly

SLIDE SEAT ONTO TOWERS

Figure 12. Rear Seat Towers

Jazzy 1100/RevJ/Feb03

www.pridemobility.com

21

Page 21
Image 21
Pride Mobility 1100 owner manual S S E M B L Y, Parts List Quantity, Seatback Assembly, To mount the seatback to the hinge