Pride Mobility 1100 Armrest Angle, Armrest Height Optional, Joystick Extension, Joystick Position

V I . C O M F O R T A D J U S T M E N T S

ARMREST ANGLE

You can adjust the armrest angle to fit your specific needs.

To change the armrest angle:

1.Lift the armrest straight up so that it is perpendicular to the floor.

2.Use a 7/16-in. wrench to loosen the jam nut. See figure 20.

3.Use a 5/32-in. hex key to loosen the adjusting screw.

4.Turn the screw clockwise to lower the front of the armrest, or turn the screw counterclockwise to raise the front of the armrest.

5.Lock the adjusting screw into place by tightening the jam nut.

ARMREST HEIGHT (OPTIONAL)

Your Jazzy may be equipped with height-adjustable armrests.

To change the armrest height:

1.Loosen the setscrew located underneath the armrest using a 3/16-in. hex wrench.

2.Remove the ball detent pin from the armrest.

3.Move the armrest up or down to the desired height.

4.Align the holes and reinsert the ball detent pin.

5.Retighten the setscrew.

JOYSTICK EXTENSION

The joystick control can easily slide out away from the armrest, or in toward the armrest.

To extend the joystick:

1.Use a 3/16-in. hex wrench to loosen the setscrew. See figure 21.

2.Slide the joystick mounting bracket into or out of the armrest to the desired position.

3.Tighten the setscrew by turning it clockwise.

SWING-AWAY JOYSTICK

Your Jazzy may be equipped with a swing-away joystick. This option enables you to move the joystick from the front of the arm- rest to the side of the armrest, without disconnecting it. See fig- ures 22 and 23.

JOYSTICK POSITION

The standard joystick can be mounted to the left or right side of your Jazzy. Contact your authorized Pride provider.

LOOSEN THIS

SETSCREW TO

ADJUST JOYSTICK

Figure 21. Joystick Extension

Figure 22. Swing-away Joystick (Forward Position)

Figure 23. Swing-away Joystick (Retracted Position)

24 www.pridemobility.com Jazzy 1100/RevJ/Feb03