Pride Mobility 1100 Joystick Installation, To install the joystick, To install the power seat

Models: 1100

1 60
Download 60 pages 56.57 Kb
Page 22
Image 22

V . A S S E M B L Y

LOCK SEAT INTO PLACE HERE

PLUG IN CONTROLLER CABLE

 

Figure 13. Front Seat Towers

Figure 14. Controller Cable

 

JOYSTICK INSTALLATION

Depending on the various configurations and options you have chosen for your Jazzy, it may have been shipped without the joystick installed in the armrest.

To install the joystick:

1.Use a 3/16-in. hex wrench to loosen the setscrew. See fig- ure 15.

2.Slide the joystick mounting bracket into or out of the arm- rest to the desired position.

3.Retighten the setscrew by turning it clockwise.

POWER SEAT OPTION INSTALLATION

Your Jazzy may be equipped with the power seat option. While the seat itself may be any one of the styles offered for this model, the way the seat base attaches to the Jazzy power base is different.

SLIDE JOYSTICK

INTO BRACKET

SETSCREW

Figure 15. Joystick

POWER SEAT ACTUATOR

To install the power seat:

l.Align the seat shaft to the hole in the actuator. See figure 16.

2. Push the seat lever backward.

VERSA SEAT OR VERSA TILT OPTION

If your Jazzy is equipped with a Versa Seat or Versa Tilt, please refer to the instruction manual supplied with the Versa Seat/ Versa Tilt.

Figure 16. Power Seat Actuator

22

www.pridemobility.com

Jazzy 1100/RevJ/Feb03

Page 22
Image 22
Pride Mobility 1100 owner manual Joystick Installation, To install the joystick, Power Seat Option Installation