Marantz SR8001, SR7001 manual Preset G. EQ ADJ, Check Auto, Reset, Frequency

6-1 PRESET G. EQ ADJ

These modes allow you to set a 9-band graphic equalizer for each of the 7 channels.

1. Select “6. ACOUSTIC EQ” from MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button.

2. Select “PRESET G. EQ ADJ” with the 3 or 4 cursor buttons.

3. Press the OK/ENTER button to enter the selection.

	PRESET			ADJUST
RESET: CH					63	0 . 0
CH	:FL				125	0 . 0
+9					250	0 . 0
					500	0 . 0
0dB
					1k	0 . 0
					2k	0 . 0
					4k	0 . 0
63	250 1k	4k	16kHz		8k	0 . 0
					16k	0 . 0
125 500		2k	8k
RETURN						EXIT

RESET:

Using the 1 or 2 cursor buttons, select the channel(s) to be reset to either the currently displayed channel (“CH”) or all channels (“ALL”), and press the OK/ENTER button to enter the setting.

“ALL”: Resets all channels.

“CH” : Resets only the currently displayed channel.

CH:

Select the channel (“FL”, “C”, “FR”, “SR”, “SBR”, “SBL” or “SL”) to adjust with the 1 or 2 cursor buttons, and switch to the adjustment mode with the 4 cursor button.

Frequency:

Select the target frequency on the graph with the 1 or 2 cursor buttons and press the OK/ENTER button to enter the selection. Adjust the level with the 3 or 4 cursor buttons. (Note that this can be adjusted to any level between –20and +9 dB in 0.5 dB increments.)

Move to the next frequency with the 1 or 2 cursor buttons, and adjust the level.

After you complete this portion of the setup, press the OK/ENTER button to enter the settings. Move cursor to “RETURN” with the 3, 4, 1 and 2 cursor buttons and press the OK/ENTER button.

6-2 CHECK AUTO

These menus are for confirming the results of AUTO SETUP function equalizer measurement (AUDYSSEY, FRONT, FLAT).

1. Select “6. ACOUSTIC EQ” from MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button.

2. Select “CHECK AUTO” with the 3 or 4 cursor buttons.

3. Press the OK/ENTER button to enter the selection.

CHECK			AUTO
MD: AUDYSSEY			63	0 . 0
CH:FL			125	0 . 0
+9			250	0 . 0
			500	0 . 0
0dB
			1k	0 . 0
			2k	0 . 0
			4k	0 . 0
63 250 1k	4k	16kHz	8k	0 . 0
			16k	0 . 0
125 500	2k	8k
RETURN				EXIT

Select MD (mode) with the 3 / 4 cursor buttons followed by the desired equalizer (“AUDYSSEY”, “FRONT”, “FLAT”).

CH:

Select the channel to check with the 1 or 2 cursor buttons.

Notes:

•The frequency will not be exactly the same as in the Preset G. EQ modes.

•FL and FR are not indicated on the CHECK AUTO 2 menu.

4.Once finished checking, select “RETURN” with the 3 / 4 cursor buttons and press the OK/ ENTER button to return to the “6. ACOUSTIC EQ” menu.

ENGLISH

39