Marantz SR7001, SR8001 manual Multi Room System, Room OUT Terminals, Speaker Terminals

ENGLISH

MULTI ROOM

SYSTEM

The Multiroom System mode allows the same source or different sources to be heard in two rooms other than where this receiver is installed.

To use the multiroom system, connect the audio from the MULTI OUT A and B AUDIO output terminals to the MULTI ROOM A and B amps.

Note:

•The SR7001 does not have a MULTI ROOM B setting.

Connect the VIDEO output (MULTI OUT) terminal to the monitor in Room A.

(MULTI VIDEO OUT terminal is linked to the source selector in Multi Room A.)

If a surround channel back speaker or speaker C (see page 20) are not used in the room where this receiver is installed, the multi speaker system can be used with the amp for the surround back channel.

Also, the COMPONENT VIDEO MONITOR OUT 2 terminal can be used for the monitor output of Room A.

(This feature cannot be used with the SR7001.)

This receiver supports multiroom system functions such as source selectors, OSD menu systems, sleep timers and remote control.

MULTI ROOM PLAYBACK USING THE MULTI

ROOM OUT TERMINALS

2.1.

AV SURROUND RECEIVER SR8001

SURROUND

DIGITAL

AAC

1. Pressing the MULTI button on the receiver one time accesses the MULTI ROOM A settings. Pressing it two times accesses the MULTI ROOM B settings. Then, pressing it a third time turns the multiroom feature off. (The SR7001 does not have a MULTI ROOM B setting.)

2. When the MULTI ROOM setting mode is engaged, one of the following screens appears on the display for 10 seconds.

– SR8001 –

* Display when MULTI ROOM A is selected

M A D V D - 1 8 d B

* Display when MULTI ROOM B is selected

M B D V D - 1 8 d B

– SR7001 –

The unit enters multi room mode and the display indicates “SELECT SOURCE” and flashes the “MULTI” indicator for approx. 10 seconds.

3. Select an input source with the INPUT SELECTOR knob.

4. Turn the VOLUME knob to set the volume of the room used in the multi room system as you like.

Note:

•The sleep timer, monaural output and other features can also be set using the MAIN MENU.

(See page 37)

MULTI ROOM PLAYBACK USING THE MULTI

SPEAKER TERMINALS

The SR7001 allows you to connect another set of speakers and place them in a different room or separated area for Iistening to music.

2. 1.

AV SURROUND RECEIVER SR8001

SURROUND

DIGITAL

AAC

1. Pressing the MULTI SPEAKER button on the receiver one time accesses the MULTI SPEAKER A settings. Pressing it two times accesses the MULTI SPEAKER B settings. Then, pressing it a third time turns the MULTI SPEAKER feature off.

(The SR7001 does not have a MULTI SPEAKER

B setting.)

2.When the MULTI SPEAKER setting mode is engaged, one of the following screens appears on the display for 10 seconds.

–SR8001 –

* Display when MULTI SPEAKER A is selected

M S A D V D - 1 8 d B

* Display when MULTI SPEAKER B is selected

M S B D V D - 1 8 d B

– SR7001 –

The unit enters multi room mode and the display indicates “SELECT SOURCE” and flashes the “MULTI” indicator for approx. 10 seconds.

3. Select an input source with the INPUT SELECTOR knob.

4. Turn the VOLUME knob to set the volume of the room used in the multiroom system as you like.

Note:

•The sleep timer, monaural output and other features can also be set using the MAIN MENU. (See page 37.)

Notes for Multi Room Speaker

•The Multiroom Speaker mode can be set for only one of the rooms, A or B.

•The MULTI ROOM SPEAKER output terminals can be used when Surround Back Speaker = “NONE” in the SPEAKER SETUP menu. (See SPEAKER SETUP, page 27)

•“The Surr. Back Speakers are in use” is displayed when the MULTI SPEAKER button is pressed when the Surround Back Speaker is not set to “NONE” in the SPEAKER SETUP menu. (See SPEAKER SETUP, page 27)

•The Multispeaker mode cannot be used at the same time as the speaker C. When connecting for multiroom use, set the SPEAKER C selector switch on the rear panel to OFF.

56