![](/images/new-backgrounds/1038099/38099103x1.webp)
BASIC OPERATION
(TUNER)
To operate the unit from the remote control, press the TUNER button on the remote control so that the tuner mode is engaged.
LISTENING TO THE TUNER
Frequency scan step for AM is selectable.
Default setup is 10 kHz step, if your country’s standard is 9 kHz step, Press BAND button on the front panel or TUNER button on the remote more than 5 seconds. Scan step will change.
Note:
•Preset memory for the tuner will clear by changing this setup.
(Using the SR7001)
1.
2. Press the BAND button to select either FM or AM.
3. Press the 3 or 4 cursor buttons on the front Panel for more than 1 second to start the auto tuning function.
4. Automatic searching begins then stops when a station is tuned in.
(Using the remote control unit)
1. To select tuner, Press the TUNER button twice within two second on the remote.
2. Press the > button until PAGE 1 is displayed.
3. Press the BAND (D5) button to select either FM or AM.
3. 2.
SURROUND |
DIGITAL |
AAC |
USE
M | 5. | 1. | To select tuner, Press the TUNER button twice | ENGLISH |
D1 |
|
| within two seconds on the remote. | |
D2 | 5. | 2. | Press the > button until PAGE 1 isdisplayed. | |
| ||||
D3 | 3. | Press the BAND (D5) button to select either | ||
D4 | 4. | |||
D5 |
| FM or AM. | ||
4. |
| |||
|
| Press the GUIDE on the remote, display will |
| |
DSS |
|
| show |
|
MD | 1. | 5. | lnput your desired station’s, frequency with the |
|
|
| |||
AMP |
| ten numbered keypad on the remote. |
| |
| 6. |
| ||
2 |
| The desired station will automatically be tuned. |
| |
|
|
| ||
|
| (FM) TUNING MODE (AUTO STEREO OR MONO) |
| |
|
|
| M |
|
|
|
| D1 |
|
|
|
| D2 |
|
|
|
| D3 |
|
|
|
| D4 |
|
|
|
| USEPAGE 1 |
|
|
|
| D5 |
|
AUTO TUNING
SOURCE
1.
USE | PAGE | 2 |
AV SURROUND RECEIVER SR8001
CH
M
D1
D2
D3
D4
D5
VOL
3.
2.
4. Press the > button until PAGE 2 is displayed.
5. Press and hold the SCAN+ (D1) or SCAN– (D2) button for 1 second or more.
6. Automatic searching begins then stops when a station is tuned in.
If tuning does not stop at the desired station, use to the “Manualtunin” operation.
SURROUND |
|
|
|
DIGITAL |
|
|
|
AAC |
|
| VOL |
CH |
|
| |
TV | DVD | VCR | DSS |
TUNER | CD | MD | |
TAPE | AUX1 | AUX2 | AMP |
|
| LIGHT |
|
1 |
|
| 2 |
RC8500SR
Learning Remote Controller
When in the auto stereo mode, AUTO indicator will
TV DVD VCR
TUNER CD
TAPE AUX1 AUX2
LIGHT
1
RC8001SR
Learning Remote Controller
DSS
MD
AMP
2
1.
MANUAL TUNING
1.
AV SURROUND RECEIVER SR8001
USE | PAGE | 2 |
D2
D3
D4
D5
3.
2.
be illuminated on the display.
The “ST” indicator is illuminated when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the “TUNED” and “ST” indicators are not illuminated.
If the signal is weak, it may be difficult to tune into the station in stereo. In such a case, Press the MODE
3. 2.
USE | PAGE | 2 |
SURROUND |
DIGITAL |
AAC |
M
D1
D2
D3
D4
D5
5.
5.
4.
CH
TV DVD VCR
TUNER CD
TAPE AUX1 AUX2
LIGHT
1
RC8500SR
Learning Remote Controller
VOL
DSS
MD
AMP
2
1.
USE | PAGE | 2 |
3.
button on the front panel. Or press the TUNER button and press the > button until PAGE 1 is displayed.
4. Press the
“AUTO” indicator is not illuminated, if FM stereo
5. broadcasts are received in monaural and the “ST” indicator is not illuminated.
To return to auto stereo mode, Press the MODE button or Press
TV | DVD | VCR | DSS |
|
TUNER | CD | MD | 1. | |
TAPE | AUX1 | AUX2 | AMP | |
|
| LIGHT |
| |
1 |
|
| 2 |
|
RC8500SR
Learning Remote Controller
CH
OK
VOL 2.
1
1.
2
49