Marantz SR7001 Manual Preset Memory Recalling a Preset Station Preset Scan, Auto Preset Memory

PRESET MEMORY

MANUAL PRESET MEMORY

RECALLING A PRESET STATION

PRESET SCAN

ENGLISH	With this unit you can preset up to 60 FM/AM stations
	in any order.
	For each station, you can memorize the frequency
	and reception mode if desired.

AUTO PRESET MEMORY

This function automatically scans the FM and AM band and enters all stations with proper signal strength into the memory.

3. 2. 4.

SURROUND

DIGITAL

AAC

	LIP.SYNC
PREV		MUTE
	GUIDE
MENU		EXIT
TEST	CH.SEL	SURR
1	2	3	3.
7.1CH	ATT	SPK-AB
4	5	6
DISP	OSD	SLEEP
7	8	9	2.
	THX
CLEAR	0	MEMO

TV	DVD	VCR	DSS		CH	VOL
TUNER	CD	CD-R	MD	1.	2.
TAPE	LIGHT	AUX2	AMP
	AUX1					OK
1			2
	RC8001SR
	Learning Remote Controller

LIP.SYNC

PREVMUTE

GUIDE

(Using the SR7001)

1. Select the desired preset station by pressing the 1 or 2 cursor buttons on the front panel.

USE PAGE 2

TUNER CD CD-R

TAPE AUX1 AUX2

LIGHT

1

M

D1

D2

D3

D4

D5

MD

AMP

2

CHVOL

2. 4. OK 5.

2.			LIP.SYNC
		PREV		MUTE
			GUIDE
		MENU		EXIT
		TEST	CH.SEL	SURR
		1	2	3
1.	4	5	6	5.
	DISP	THX	SLEEP
		OSD
	7	8	9

CLEAR 0 MEMO

2. 4. 1. 3. 2. 5.

AV SURROUND RECEIVER SR8001

SURROUND

DIGITAL

AAC

1. To select FM , press the BAND button on the front panel.

2. While pressing the MEMORY button, press the

1 cursor button.

“AUTO PRESET” will appear on the display, and scanning starts from the lowest frequency.

3. Each time the tuner finds a station, scanning will pause and the station will be played for five seconds.

During this time, the following operations are possible.

The band can be changed by the BAND button.

4. If no button is pressed during this period, the current station is memorized in location Preset 02.

If you wish to skip the current station, press the 3 cursor button during this period, this station is skipped and auto presetting continues.

5. Operation stops automatically when all 50 preset memory positions are filled or when auto scanning attains the highest end of all bands. If you desire to stop the auto preset memory at anytime, press the CLEAR button.

(Using the SR7001)

1. Tune into the radio station you desire (Refer to the “MANUAL TUNING” or “AUTO TUNING” section).

2. Press the MEMORY button on the front panel. “– –“ (preset number) starts blinking on the display.

3. Select the preset number by pressing the 1 or 2 cursor buttons, while this is still blinking (approx. 5 seconds)

4. Press the MEMORY button again to enter. The display stops blinking.

The station is now stored in the specified preset memory location.

(Using the remote control unit)

1. Tune into the radio station you desire (Refer to the “MANUAL TUNING” or “AUTO TUNING” section).

2. Press the MEMO button on the remote. “– –“ (preset number) starts blinking on the display.

3. Enter the desired preset number by pressing the numeric buttons.

Note:

•When entering a single digit number (2 for example), either input “02” or just input “2” and wait for a few seconds.

(Using the remote control unit)

1. Press the TUNER button twice within two seconds on the remote.

2. Press the > button until PAGE4 is displayed

3. Press the P-SET+ (D4) or P-SET– (D5) button to tune in the deseired preset station.

Or enter the preset station number with the numeric buttons.

RC8001SR

Learning Remote Controller

(Using the remote control unit)

1. Press the TUNER button twice within two seconds on the remote.

2. Press the > button until PAGE2 is displayed and press the P-SCAN (D4) on the remote.

“PRESET SCAN” appears on the front display and then the preset station with the lowest preset number is recalled first.

3. Preset stations are recalled in sequence (No.1

→No.2 → etc.) for 5 seconds each.

No stored preset number will be skipped.

4. You can fast forward the preset stations, press the > button until PAGE4 is displayed and press the P-SET+ (D4) continuously.

5. When the desired preset station is received, cancel the preset scan operation by pressing the CLEAR button or P-SCAN (D4) on the remote.

50