Acoustic EQ | Marantz SR7001, SR8001

ENGLISH

6 ACOUSTIC EQ

This display is for setting up the equalizer and changing the Equalizer mode.

• PRESET G. EQ ADJ :

“6-1 PRESET G. EQ ADJ” (see page 39)

• CHECK AUTO 1 & 2 :

“6-2 CHECK AUTO” (see page 39)

EQ MODE:

There are 4 equalizer modes to choose from: PRESET G. EQ that allows the user to manually adjust the equalizer, and AUDYSSEY, FRONT and FLAT that automatically adjust the equalizer from the measurement results of the AUTO SETUP feature (see page 28).

AUDYSSEY:

This mode adjusts the frequency characteristics of all speakers so as to create the best listening environment for the sound characteristics of the listening room.

FRONT:

This mode matches the characteristics of each speaker to those of the front speakers.

FLAT:

This mode ﬂattens the frequency characteristics of all speakers. It is suited for playback of multichannel music such as Dolby Digital and DTS.

PRESET:

This mode adjusts the graphic equalizer that was set in PRESET G.EQ ADJ to adjust the characteristics of each speaker (see page 39).

3. Select “FRONT”, “FLAT”, “AUDYSSEY”, “PRESET” or “OFF” with the 1 or 2 cursor buttons.

After you complete this portion of the setup, move the cursor to “RETURN” with the 3, 4, 1 and 2 cursor buttons and press the OK/ENTER button.

Note:

•“AUDYSSEY”, “FRONT” and “FLAT” can be selected after executing the AUTO SETUP feature.

•If a speaker that was determined “NON” in Auto Setup is manually turned on, the “AUDYSSEY”, “FRONT” and “FLAT” modes cannot be selected.

•The equalizer turns off when the Pure Direct mode, Source Direct mode, Dolby Headphone or Virtual mode is set.

6 . ACOUSTIC EQ .

EQ . MODE	: OFF
PRESET G . EQ1 ADJ
CHECK AUTO
RETURN	NEXT	EXIT

OFF:

The graphic equalizer is not used.

1. Select “6. ACOUSTIC EQ” from MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button.