Fujitsu V3.1 manual Installing the Virtual-IO Manager using the command line

3 Installation and uninstallation

13. In the final screen you may view the release notes or the installation log.

14.Click Finish to end the installation.

3.4.2Installing the Virtual-IO Manager using the command line

The installation script install_viom.sh may also be used in a non-graphical installation, as explained here. You find the script in the directory where you unzipped the VIOM software package (see "Installing the Virtual-IO Manager using a graphical interface" on page 74). Simply use the --no-guiswitch and enter suitable parameters.

The following syntax is supported:

sh install_viom.sh

[ -–dbhost=<ip-addresshostname>][ -–dbport=<port-number>] [-–dbuser=<username>][ -–dbpasswd=<password>]

[ --mac-range=<first-mac-addr>,<last-mac-addr>MAC<x>MAC<xy>] [ --wwn-range=<first-wwn-addr>,<last-wwn-addr>WWN<x>]

[ -–no-gui][ --license-key=<key-string>]

84 ServerView Virtual-IO Manager