Fujitsu V3.1 manual Click Register new license

3 Installation and uninstallation

15.Click Register new license.

Enter at least one valid license here so that you can use the Virtual-IO Manager functions. You can enter several licenses here. For more infor- mation on the License Manager, see section "License management" on page 90

• The licenses are not version bound.

•Licenses purchased with Virtual-IO Manager versions prior to V2.4 are also still valid. These licenses (v1) contain a chassis count which is multiplied by 18 to get the assign count used in licenses (v2) purchased with Virtual-IO Man- ager V2.4 or later.

16.Click Exit in the VIOM License Manager dialog box to exit the License Manager. The dialog box closes.

17.Click Finish to end the installation.

3.2.2Installing the Virtual-IO Manager using the command line interface

The Virtual-IO Manager can be installed using the command line interface. You start the installation via the installation package SV_VIOM.exe which you will find on the ServerView Suite DVD 1 under ServerView – Virtual-IO Manager.

The installation parameters like address ranges and VIOM license can be specified by command line. The following syntax is supported:

SV_VIOM.exe /q [DO_ADDRESS_RANGE_SELECTION=truefalse][MAC_ RANGE=<mac_range>][MAC_START="<mac_address_start>"] [MAC_END="<mac_address_end>"][WWN_RANGE=<wwn_range>][WWN_ START="<wwn_address_start>"][WWN_END="<wwn_address_

68 ServerView Virtual-IO Manager