5.4 Wizards
Assigns the port as a backup port to the uplink set. If the port is already assigned to another uplink set, this assignment is deleted.
Remove
Only available if the port is already assigned to the uplink.
Removes the port assignment from the uplink set.
Active
Only available if the port is configured as Backup.
The corresponding port is configured as active and no longer as backup.
Backup
Only available if the port is configured as Active.
The corresponding port is configured as a backup port and no longer as active port.
Ports configured as active or backup ports are indicated by different col- ors in the display (light red/light green or dark red/dark green). The name of the uplink set is assigned to configured ports, which you can rec- ognize by this.
5.4.2.3DCB Properties (Edit Uplink Set wizard - single/VLAN network)
DCB Properties is the second step in the Edit Uplink Set wizard if a single network or a VLAN network is edited.
It is only displayed if the connection blade supports DCB (Data Center Bridging), i.e. for PY CB Eth Switch/IBP 10 Gb 18/8 con- nection blades.
ServerView | 183 |
