5
Restore only reassigned profiles
Specifies that only the profiles that are reassigned to the selected blade servers will be restored (see section "Restoring blade server con- figurations" on page 306). If you do not select this option, all the profiles saved in the backup file will be restored.
Keep existing profiles
Specifies that the existing profiles remain the same. This option is select- ed automatically if you select the Restore only reassigned profiles option.
If you do not select this option, all existing profiles are deleted before the configuration is restored.
If you select the Keep existing profiles option, select what is to happen with the existing profiles of the same name in On Existing Profiles.
Abort Restore
The restore operation is canceled and an error message displayed.
Rename Restored Profiles
The existing profiles are renamed by adding the backup date and possibly also a number to the file names.
Replace Existing Profiles
The existing profiles are replaced by the profiles contained in the backup.
Use Existing Profiles
The profiles are not restored and the existing profiles continue to be used instead.
Assign new virtual addresses
The restored profiles are assigned new virtual addresses.
Restore Address Ranges
Specifies that the origin address ranges will be restored.
244 | ServerView |
