4.4 Configurations on the managed PRIMERGY rack server
It is also important that the members of a stack have a unique "user assigned" name in the MMB and that the stack member IDs of the par- ticipating connection blades are set to 1 before building the stack.
The typical procedure for correct handling by VIOM is:
•Configure the stack by enabling the blade server internal stacking links and by connecting SB11 connection blades in different fabrics of the same chassis by special stacking cables.
•Check that the blade server management blade correctly shows the stat- us of the stack. For this it is important that all members of the stack show the same IP address, which must be the IP address of the stack master. The stacking status in MMB must be Master for exactly one member of the stack and must be Member for all other members of the stack. As long as these two conditions are not fulfilled, VIOM will not be able to handle the stack correctly.
•Update the information for this blade server chassis in ServerView Oper- ations Manager by performing the “explore” action for the blade server chassis
•Perform the “Refresh” action in VIOM user interface so that also VIOM has the updated information about the changed configuration. The last two actions will also be done automatically when waiting about two or three minutes (this also depends on the refresh interval configured in ServerView Operations Manager).
It is not supported to change the stack configuration while the blade server chassis is managed by VIOM. If it is needed to change the stack con- figuration, the chassis is to be unmanaged in VIOM before changing the con- figuration.
4.4Configurations on the managed PRIMERGY rack server
A PRIMERGY rack server must fulfill the following requirements in order to be manageable by VIOM:
ServerView | 129 |
