1 Introduction
1.3Supported Hardware
Managed BX600 blade servers
Supported systems: BX600 S3 with MMB S3. For information on the required firmware version, see the release notes included.
The following table shows which server blades are supported with which range of functions.
Server blade | Scope of functions |
BX620 S2, BX620 S3 Server profiles without I/O virtualization but with net- work connection definition
BX620 S4, BX620 S5, Server profiles with I/O virtualization and network
BX620 S6 | connection definition |
BX630 | Server profiles without I/O virtualization but with net- |
| work connection definition |
BX630 S2 | Server profiles with I/O virtualization and network |
| connection definition |
Table 1: Supported server blades
For information on the BIOS and iRMC firmware version, see the release notes supplied.
The
•In fabric 1: IBP or LAN modules
•In fabric 2: IBP modules, LAN modules or FC switch blades of the type SW4016
You must not mix the modules within a fabric.
Fabric 2 can also be empty. Only one of the permitted connection blades can be inserted in fabric 1 and 2 at each time.
14 | ServerView |
