1 Introduction

 

PCI controller

Scope of functions

Emulex 10GbE OCe10102

CNA

Emulex 8Gb FC HBA LPe 12002

Emulex 8Gb FC HBA LPe 1250 (1 channel)

INTEL 2-port 10GbE (D2755 – Niantec)

INTEL 4-port (D2745 - Bar- ton Hills)

INTEL 2-port (D2735 - Kawela 82576NS)

INTEL Eth Ctrl 4x1Gb Cu PCIe x4 (D3045)

INTEL Eth Ctrl 2x1Gb Cu PCIe x4 (D3035)

INTEL 10GbE 10GBase- T(RJ45) PCIe LAN

Define physical functions and type (LAN, FCoE, iSCSI) of physical functions.

Assign virtual addresses to physical function and optionally define boot parameter.

This CNA supports two physical functions for each of both physical ports. The first physical function must be of type LAN. The physical functions for the two physical ports must be defined similarly. This means that the storage function for both physical ports must be of the same type. When using iSCSI with iSCSI boot the iSCSI initiator must be identical. Excep- tion: physical port is completely disabled.

Assign virtual WWPN and WWNN.

Optionally define the first and second boot tar- get and LUN.

Disable I/O ports.

Assign virtual MAC.

Optionally define PXE boot per port.

Disable I/O ports.

There is no explicit disable functionality for I/O ports in VIOM. I/O ports that are not defined in a VIOM profile will be implicitly disabled if the device supports this func- tionality.

20

ServerView Virtual-IO Manager

Page 20
Image 20
Fujitsu V3.1 manual Introduction PCI controller Scope of functions, Cna