
7.3 Deactivating management with VIOM
7.3Deactivating management with VIOM
You deactivate the management of servers by moving the servers from the VIOM Managed server group to the VIOM Manageable server group.
1.Select the required servers. To do this, click the required server on the left of the VIOM window in the VIOM Managed server group.
2.Click Unmanage on the Setup tab.
3.If you are unmanaging a blade server, you will receive a warning that the previous configuration will be deleted if you move the server. The warn- ing also informs you that, before deactivating management with VIOM, you should remove all the LAN cables except the one connected to the first uplink port.
If you click Yes, the previous configuration with VIOM is deleted and the blade server is added to the VIOM Manageable server group.
If you click No, you close the window without moving the server.
For PRIMERGY rack servers: If you are only unmanaging PRIMERGY rack servers, a simple confirmation message is shown.
For more information on the internal operations for deactivating management with VIOM, see section "VIOM internal operations on blade servers" on page 261
7.4VIOM internal operations on blade servers
This section contains a list of internal operations that are executed when you activate or deactivate management with VIOM for a blade server.
VIOM internal operations during activation
When you activate management with the
ServerView | 261 |