5
Next to each virtual address, you see the status of the address. The status can have the following values:
Status | Significance |
Allocate (OK) | The address is automatically |
| assigned. |
OK (OK) | The address is valid and has not |
| been assigned yet. |
Not checked (warn- The address entered has not been
ing) | checked yet. |
No value (error) | Either an address was not specified |
| or Allocate virtual address was |
| not selected. |
Not unique (error) | The same address is in use for sev- |
| eral ports. |
Out of range | The address is outside the spec- |
(error) | ified address range. |
Syntax error | The address is syntactically incor- |
(error) | rect. |
Already used | The address is already in use |
(error) |
|
Check Addresses
A check is performed to determine whether the addresses are currently in use in other profiles and whether they are within the range specified. This button is only active if for at least one address Allocate virtual address has not been selected and all virtual addresses have been entered correctly.
5.4.3.7Confirm step (Create Server Profile wizard)
Confirm is the last step in the Create Server Profile wizard. In this step, you can check the entries you have made once again.
204 | ServerView |
