Upfront tool |
|
storage |
|
| |
M | N |
|
On some models, a powered hand tool stores behind the door on front of the handle (M).
On other models, the stair/upholstery nozzle stores in this area (N).
Powered hand tool
The powered hand tool is shipped in a plastic bag for protection. To remove the bag before using the tool, open tool door.
Pull tool down and outward. Remove tool from bag. Discard bag.
O
To replace tool, push connector end of tool (O) up into opening in storage area. Snap nozzle into place.
6
Stair/upholstery nozzle
To store stair/upholstery nozzle, open tool door, place nozzle in bracket and fit it securely into position. To remove, reverse this procedure.
For models with the powered hand tool, the stair/upholstery nozzle stores on the back of the cleaner (Fig.
How to reattach tool cover
The tool cover is designed with a break- away feature which allows it to snap free if it is pushed open too far.
To reattach, align hinges of cover with slots on sides of tool storage area.
Push cover down to secure in place.
