Hoover F5903-900, F5910-900 owner manual Storing hose & tool

1-10	F
	G
	H
I
Storing hose & tool
Stretch hose out and identify ends.
F. Nozzle connector end of hose	H. Solution tube
G. Trigger	I. Converter end of hose

Note: You may find it helpful when storing the hose and nozzle to refer to the informa- tion on the back of the deep cleaner and on the converter end of the hose.

1-11
J	H
	I

Start with converter end of hose (I). Fit converter over tab near tool holder (j). Press converter firmly to snap in place. Press solution tube (H) into clip next to converter as shown.

1-12		K
	L	L

Wrap hose around hook on upper handle (K). Press hose into clips on upper hose holder (L).

1-15

Position stair/upholstery nozzle (models with powered hand tool) or utility nozzle (not included with all models) in holder at base of cleaner and snap it into place as shown at arrow.

1-13

Wrap hose around lower tool holder and continue until nozzle connector is near upper hose holder. Clip hose in place.

1-16

Slide bare floor attachment into holder as shown. (Not included with all models.)

1-14

Press cord into cord clip on back of hose holder. Pull cord tight.

Continued ➔ 5