Hoover F5903-900, F5910-900 owner manual Removable brushes, To remove brushes, To replace brushes

3-24

A

B

10. For heavily soiled areas, it may be

necessary to repeat the cleaning

process. Make crisscrossing strokes to

the original pattern; overlap each pass.

Make no more than 2 passes with the solution over any one area to prevent over-wetting and damage to fabric.

If additional cleaning is necessary, wait until the upholstery is completely dry before using the tool again.

11.Empty recovery tank when the motor sound becomes higher pitched and there is a loss in suction (see “Automatic shut-off”, page 8).

When finished cleaning, follow “After cleaning” instructions on page 11 and “After using tool” instructions on page 13.

4. Maintenance

Removable brushes

Your deep cleaner is equipped with removable brushes for easy cleaning.

To remove brushes

Disconnect cleaner from electrical outlet.

To prevent possible leaking, remove clean solution tank and recovery tank. Set tanks aside.

4-3

B

B

B

B

Press all four latches (B) and pull brush block out. The brushes can be cleaned under running water.

4-1

Press handle release pedal to lower han- dle. Turn cleaner over so bottom is fac- ing up.

4-4		C
		D
	E	F
		D
		C

To replace brushes

Align posts (C) on both ends of brush assembly with slots (D) in cleaner hous- ing.

Make sure that square post (E) also aligns with square hole (F). Turn brushes slightly until post fits easily into hole.

4-2

B

A

B

B

Grasp inner portion of brush (A) and pull brush assembly out slightly to reveal latches (B).

4-5

Press brush assembly firmly to snap into place.

Continued ➜

15