13
SCALPING --The scalping tec hnique removes
unwanted vegetation down to the ground. H old
the bottom of the trimmer head about 3 in. (8
cm)above the gr ound and at an angle. Allo w the
tip of the line to strike the ground around trees,
posts, monuments, etc. This technique in-
creases line wear.
Scalping
MOWING --Your trimmer is ideal for mowing
in places conventional lawn mowers cannot
reach. In the mowing position, keep the line
parallel to the ground. Avoid pressing the
head into the ground as this can scalp the
ground and damage the tool.
Mowing
SWEEPING-- The fanning action of the rotat-
ingline can be used to blow away loose debris
from an area. Keep the line parallel to and
above the area surface and swing the tool
from side to side. Sweeping
MAINTENANCE
WARNING: Dis connect the spark
plug before performing maintenance except
for carburetor adjustments.
HELPFUL TIP
IMPORTANT: Have all
repairs other than the rec-
ommended maintenance
described in theins truction
manual performed by an
authorized service dealer.
If any dealer other than an authorized
service dealer performs work on the
product, Poulan PRO may not pay for
repairs under warranty. It is your r e-
sponsibility to maintain and perform
general maintenance.

CHECK FOR LOOSE

FASTENERSAND PARTS

SSpark Plug Boot
SAir Filter
SHousing Screws
SAssist Handle Screw
SDebris Shield

CHECK FOR DAMAGED OR

WORN PARTS

Contact an authorized service dealer for re-
placement of damaged or worn parts.
SON/STOP Switch -- Ensure ON/STOP
switch functions properly by pushing and
releasing the switch. Make sure engine
stops. Wait5 s econds before attempting to
restart unit to allow switch to reset. Restart
engineand c ontinue.
SFuel Tank --Discontinue use of unit if fuel
tank shows signs of damage or leaks.
SDebris Shield -- Discontinue use of unit if
debris shield is damaged.

INSPECTAND CLEAN UNIT AND DE-

CALS

SAfter each use, inspect complete unit for
loose or damaged parts. Clean the unit and
decals using a damp cloth with a mild deter -
gent.
SWipe offunit with a c lean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform-
ance and increases fuel consumption and
harmful emissions. Always clean after every
5 hours of operation.
1. Cleanthecov er and the area around it to
keep dirt from falling into the carburetor
chamber when the cover is removed.
2. Removeparts by press ing button to re-
lease air filter cover.
NOTE: Toav oid creating a fire hazard or
producingharmful ev aporative emissions, do
notc leanf ilter in gasoline or other flammable
solvent.
3. Washthe filter in soap and water.
4. Allowfilter to dry.
5. Replaceparts.