Primer Bulb

WARNING: Always stop unit and dis-

 

connect spark plug before removing or instal-

 

ling attachments.

REMOVING TRIMMER ATTACH-

MENT (OR OTHER OPTIONAL

ATTACHMENTS)

CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability.

1. Loosen the coupler by turning the knob counterclockwise.

Start Lever

Coupler

Starter Handle

4.Pull starter rope handle sharply until en- gine starts and runs.

5.Allow unit to run for 10--15 seconds, then fully squeeze the throttle trigger to disen- gage the starting system.

STARTING A WARM ENGINE

1.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until engine runs smoothly.

2.Pull starter rope sharply while squeezing throttle trigger until engine runs.

NOTE: Normally, the warm starting proce- dure can be used within 5--10 minutes after the unit is turned off. If the unit sits for more than 10 minutes without being ran, it will be necessary to start the unit by following the steps under STARTING A COLD ENGINE or following the starting instruction steps shown on the unit.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the start lever to the RUN position. Fully squeeze throttle trigger. Pull the starter han- dle repeatedly while squeezing throttle trigger until engine starts and runs. This could re- quire pulling the starter handle many times, depending on how badly the unit is flooded. If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

OPERATING THE COUPLER

This model is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:

MODEL: Edger . . . . . . . . . . . . . . . . . . . . . PP1000E Cultivator . . . . . . . . . . . . . . . . . . PP2000T Blower . . . . . . . . . . . . . . . . . . . . PP3000B Brushcutter . . . . . . . . . . . . . . . . PP4000C Pruner . . . . . . . . . . . . . . . . . . . . PP5000P

AttachmentLOOSEN

Knob

TIGHTEN

2.Press and hold the locking/release button.

Locking/Release

Button

Attachment

Coupler

Upper Shaft

3.While securely holding the engine and upper shaft, pull the attachment straight out of the coupler.

INSTALLING OPTIONAL ATTACH- MENTS

1.Remove the shaft cap from the attach- ment (if present).

2.Position locking/release button of attach- ment into guide recess of coupler.

3.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

4.Before using the unit, tighten the knob se- curely by turning clockwise.

Coupler Primary Hole

Guide Recess

Locking/

Upper Release Attachment

Shaft Button

WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit. All attachments are designed to be used in the primary hole unless otherwise stated in the applicable attachment instruction manual. Using the wrong hole could lead to seri- ous injury or damage to the unit.

11

Page 10 Page 12
Page 11
Image 11
Poulan 115270526 Removing Trimmer Attach Ment or Other Optional Attachments, Starting a Warm Engine, Operating the Coupler
Page 10 Page 12

952711928, 115270526 specifications

The Poulan 115270526 and 952711928 are both notable models in the Poulan lineup, a brand well-known for delivering reliable outdoor power equipment. Poulan has built a reputation for producing chainsaws, trimmers, and mowers that effectively combine performance, durability, and affordability.

The Poulan 115270526 is a gas-powered chainsaw designed for both amateur and professional use. One of its most commendable features is its powerful 42cc engine, which offers a good balance of power without being overwhelmingly heavy. This makes it an excellent choice for homeowners who need to tackle yard work, firewood cutting, or tree trimming tasks. The chainsaw comes equipped with a 16-inch bar, making it versatile enough to handle moderately sized jobs with ease.

One of the standout technologies in the Poulan 115270526 is the Easy Start system. This innovative feature significantly reduces the effort required to start the engine, allowing users to get to work without the frustration usually associated with pull-start systems. Additionally, the chainsaw includes an automatic oiler, ensuring the chain remains lubricated for smooth operation, which enhances the overall lifespan of the tool.

On the other hand, the Poulan 952711928 is renowned for its user-friendly design and adaptability. This model also features a 42cc engine, making it comparable to the 115270526 in terms of power. Also equipped with a 16-inch bar, it is tailored for versatility in handling various cutting tasks. The Poulan 952711928 emphasizes comfort, boasting an ergonomic handle design that reduces vibration, allowing for more prolonged use without causing fatigue.

Both models employ advanced air filtration systems that enhance engine performance and longevity by keeping contaminants at bay, thus reducing wear and tear. The chainsaws are also designed for easy maintenance, featuring tool-less chain adjustment systems that allow users to make quick adjustments on the go.

In summary, both the Poulan 115270526 and 952711928 are excellent choices for those seeking reliable and efficient chainsaws. With their powerful engines, ergonomic designs, and user-friendly features, these models stand out among homeowners and professionals alike. Whether you're looking to trim branches or cut firewood, both tools come equipped to handle your outdoor needs effectively while ensuring a comfortable user experience.
Top Page Image Contents