KitchenAid KFP1333 manual Installing the Mini-Bowl and Mini-Blade, Setting Up Your Food Processor

Setting Up Your Food Processor

Installing the Multipurpose Blade or Dough Blade

IMPORTANT: The multipurpose blade and dough blade can only be used with the work bowl.

1.Place the blade on the power shaft.

2.Rotate the blade so it falls into place on the power shaft.

3.Push to lock: Press down firmly on the multipurpose blade until it is down as far as it will go. The multipurpose blade features an internal seal that fits tightly over the center of the work bowl.

4.Install the work bowl cover, being sure it locks into place.

Installing the Mini-Bowl and Mini-Blade

1.Place the mini-bowl inside the work bowl over the power shaft. Rotate the mini- bowl until the tabs on the top edge of the bowl drops into the indents on the top of the work bowl.

2.Insert the drive adapter into the mini- blade, and place on the power shaft. It may be necessary to rotate the blade until it falls into place. Press down firmly to lock it into place.

3.Install the work bowl cover, being sure it locks into place.

4.To remove the mini-bowl after processing, remove the mini-blade by pulling straight up on the cap. Then lift the bowl straight up and out, using the two finger grips located along the top edge of the bowl.

14