KitchenAid KFP1344, KFP1333 manual Setting Up Your Food Processor, Attaching the Work Bowl, English

Models: KFP1344

1 26
Download 26 pages 56.88 Kb
Page 11
Image 11
Setting Up Your Food Processor

Setting Up Your Food Processor

Attaching the Work Bowl

1.Place the Food Processor on a dry, level countertop with the controls facing forward. Do not plug in the Food Processor until it is completely assembled.

2.Place the work bowl on the base, aligning the raised portion with the indentation on the base. The center hole should fit over the power shaft.

Attaching the Work

Bowl Cover

NOTE: Be sure to install the desired accessory before attaching the work bowl cover.

1.Place the work bowl cover on the work bowl with the feed tube just to the left of the work bowl handle. Grasp the feed tube and turn the cover to the right until it locks into place.

English

Attaching the Work Bowl Power Shaft

3.Grasp the work bowl handle and turn the bowl counterclockwise to lock it on the base.

Select the accessory you would like to use and install it according to the instructions on the following pages.

2.Fit the food pusher into the 3-in-1 feed tube. See “Using the 3-in-1 Feed Tube” for details on working with different sized foods.

NOTE: Your Food Processor will not operate unless the work bowl and work bowl cover are properly locked on the base, and the large pusher is inserted to the maximum fill line on the feed tube (approximately halfway down).

Food

Pusher

11

Page 11
Image 11
KitchenAid KFP1344, KFP1333 manual Setting Up Your Food Processor, Attaching the Work Bowl Cover, English