Setting Up Your Food Processor
Installing the Optional Chef’s Bowl (not included)
The optional Chef’s Bowl can only be used with the slicing or shredding discs. It cannot be used with the multipurpose blade.
1.Place the Chef’s Bowl inside the work bowl, sliding it down over the power shaft. Rotate the Chef’s Bowl until it drops into place. Once in place, it cannot be rotated.
2.Install the desired slicing or shredding disc.
3.Install the work bowl cover, being sure it locks into place.
To remove the Chef’s Bowl after processing, grasp by the finger grips along the top edge of the bowl and lift straight up and out.
Using the 3-in-1 Feed Tube
The 3-in-1 feed
tube features a
pusher. Use the
entire food pusher to process large
items, or use the inner portions to
create medium- sized or small feed tubes to process smaller items.
To slice or shred small items, insert
the
pusher to process small or slender items, like single carrots or celery stalks. When not using the small feed tube, be sure to lock the small pusher into place.
To slowly drizzle oil or other liquid ingredients into the work bowl, just fill the small pusher with the desired amount of liquid. A small hole in the bottom of the pusher will drizzle the liquid ingredient at a constant rate.
English
Finger grips
15
