Installation Guide
Push2TV Adapter for Wireless Display (PTV3000)
Package Contents
Push2TV adapter
Power adapter
USB power cable
Push2TV Front and Back Views
LED
Wireless |
|
|
| Reset |
|
|
| ||
Display |
|
|
|
|
Mode / |
|
| HDMI | |
WPS |
| USB Power | ||
|
| |||
Installation
To install and set up the Push2TV adapter with Intel WiDi:
1.Connect the Push2TV adapter to your TV and plug in the power adapter.
The Push2TV adapter LED is blinking when the adapter powers up. The LED turns solid to indicate that the adapter is ready, but is not yet connected to your computer.
2.Turn on your TV and select the correct TV input source for your TV.
•If you are not sure which input source to use, check the documentation that came with your TV set.
•The Ready for Connection screen displays on your TV within 30 seconds.
If you do not see this screen, make sure that the TV input is set to the HDMI port where the Push2TV adapter is connected and all cable connections are firmly secured.
3.On your laptop, launch the Intel Wireless Display software. There are two ways to launch the software
•If your laptop has a 
button or key, press it.
•From Windows, select Start. In the search field, type Intel Wireless Display. Select and run the Intel Wireless Display software.
4.Use the Intel Wireless Display software to scan and find the Push2TV adapter.
The screen on the right shows that the Intel Wireless Display software has found the wireless adapter.
5.
6.If you are connecting the laptop to the Push2TV adapter for the first time, the Push2TV adapter displays a
7.Within a few seconds, the TV screen displays your laptop screen. The LED on the Push2TV adapter turns solid.
You are now ready to use Push2TV for Intel Wireless Display.
Adjusting Your TV Display
You can adjust the image display on the TV screen:
•To change how the image fits on the TV screen, on the Intel Wireless Display, click the Properties button. Then click the Resize TV picture button and adjust the picture using the plus or minus symbols.
•To remove black bars displayed on the sides of your TV screen, open the graphics properties and change the resolution to 1280x720. Changing the resolution might result in black bars on the laptop. To remove the black bars, open the graphics properties and clear the preserve aspect ratio check box.
