Button

Air Filter

Air Filter Cover

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

WARNING: The muffler on this prod- uct contains chemicals known to the State of California to cause cancer.

As your unit is used, carbon deposits build up on the muffler and spark arresting screen and

must be removed to avoid creating a fire haz- ard or affecting engine performance.

For normal homeowner use, the muffler and spark arresting screen will not require any service. After 50 hours of use, we recom- mend that your muffler be serviced or re- placed by an authorized service dealer.

REPLACE SPARK PLUG

Replace the spark plug each year to ensure the engine starts easier and runs better. Set spark plug gap at 0.025 inch (0.6 mm). Igni- tion timing is fixed and nonadjustable.

NOTE: This spark ignition system complies with the Canadian standard ICES--002.

1.Twist, then pull off spark plug boot.

2.Remove spark plug from cylinder and discard.

3.Replace with Champion RCJ-6Y spark plug and tighten securely with a 3/4 inch (19 mm) socket wrench.

4.Reinstall the spark plug boot.

SERVICE AND ADJUSTMENTS

REPLACING THE LINE

For unit to operate properly, the cutting line should be replaced when line becomes worn to less than 3 inches (7.5 cm) in length from the edge of the line exit tunnels on each side of the cutting head.

1.Remove and discard worn line before installing new line.

2.Use only 0.115 inch (3 mm) diameter Poulan PRO brand cut length line.

3.Insert one end of the line through the positioning tunnel.

4.Continue to feed line through tunnel until line is centered (leaving equal amounts on each side). See illustration below.

Positioning tunnel

5.Insert ends of line one at a time through the line exit tunnels.

6.Pull the line and make sure the line is ex- tended fully through the tunnels.

Line exit

Line exit

tunnel

tunnel

7.Correctly installed line will be the same length on both ends.

REPLACING THE CUTTING HEAD

1.Align hole in the dust cup with the hole in the side of the gearbox by rotating the dust cup.

2.Insert a small screwdriver into aligned holes. This will keep the shaft from turning while removing and installing trimmer head.

Screwdriver

3.While holding the screwdriver in position, remove trimmer head by turning clock- wise.

4.Thread replacement trimmer head onto the shaft by turning counterclockwise. Tighten until secure.

5.Remove the screwdriver.

CARBURETOR IDLE SPEED

ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The trimmer head, blade or any optional attachment will be spinning during most of this procedure. Wear your protective equipment and observe all safe- ty precautions. After making adjustments, the trimmer head, blade or any optional attachment must not move/spin at idle speed.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

14

Page 13 Page 15
Page 14
Image 14
Poulan 952711928, 115270526 instruction manual Service and Adjustments
Page 13 Page 15

952711928, 115270526 specifications

The Poulan 115270526 and 952711928 are both notable models in the Poulan lineup, a brand well-known for delivering reliable outdoor power equipment. Poulan has built a reputation for producing chainsaws, trimmers, and mowers that effectively combine performance, durability, and affordability.

The Poulan 115270526 is a gas-powered chainsaw designed for both amateur and professional use. One of its most commendable features is its powerful 42cc engine, which offers a good balance of power without being overwhelmingly heavy. This makes it an excellent choice for homeowners who need to tackle yard work, firewood cutting, or tree trimming tasks. The chainsaw comes equipped with a 16-inch bar, making it versatile enough to handle moderately sized jobs with ease.

One of the standout technologies in the Poulan 115270526 is the Easy Start system. This innovative feature significantly reduces the effort required to start the engine, allowing users to get to work without the frustration usually associated with pull-start systems. Additionally, the chainsaw includes an automatic oiler, ensuring the chain remains lubricated for smooth operation, which enhances the overall lifespan of the tool.

On the other hand, the Poulan 952711928 is renowned for its user-friendly design and adaptability. This model also features a 42cc engine, making it comparable to the 115270526 in terms of power. Also equipped with a 16-inch bar, it is tailored for versatility in handling various cutting tasks. The Poulan 952711928 emphasizes comfort, boasting an ergonomic handle design that reduces vibration, allowing for more prolonged use without causing fatigue.

Both models employ advanced air filtration systems that enhance engine performance and longevity by keeping contaminants at bay, thus reducing wear and tear. The chainsaws are also designed for easy maintenance, featuring tool-less chain adjustment systems that allow users to make quick adjustments on the go.

In summary, both the Poulan 115270526 and 952711928 are excellent choices for those seeking reliable and efficient chainsaws. With their powerful engines, ergonomic designs, and user-friendly features, these models stand out among homeowners and professionals alike. Whether you're looking to trim branches or cut firewood, both tools come equipped to handle your outdoor needs effectively while ensuring a comfortable user experience.
Top Page Image Contents