1. NAMES OF PARTS
Rear grille/louver** | Chassis | Front grille* | |
Wall case** | |||
|
|
*Shipped with the chassis
**Check essential components list on chassis
2.WALL CASE AND REAR GRILLE
1)The STK01WC wall case must be properly installed according to the instructions packed with the case.
2)Remove the corrugated stiffener and the outdoor protective panel. Use the slit in the outdoor panel as a grip and push out.
3)Install the rear grille from the room side according to the instructions packed with the grille.
Protective panel | Slit |
|
Stiffener
3.INSTALLATION
1)Remove the front grille by pulling out at the bot- tom to release it, then lift it up to clear the rail along the chassis top.
2
1
2)Slide the chassis into the wall case and secure with four screws through the chassis flange holes.
Wall
Wall case
3)Reinstall the front grille by hooking the top over the rail along the chassis top, then pushing it in at the bottom.
1
2
7
