3)Attach the field-supplied conduit to the bottom plate.

4)Connect the power supply conductors to the Terminal block and the Grounding screw.

5)Attach the cover plate.

Terminal block

Grounding screw

Cover plate

Bottom plate Conduit

6)Reinstall the front grille. (See “Front Grille” on page 3.)

5.AIR LOUVERS

The direction of the heated or cooled air may be adjusted by removing and turning the louvers around.

To change the louver direction, remove the front grille and 2 louver screws that hold the louvers in place. Turn the louver section 180° (end for end), replace the screws and replace the front grille. The textured face of the louver section must be facing toward the room side.

Front grille

Louver screws

6. TEMPERATURE LIMITING

The normal range of the thermostat control is approximately 55°F to 88°F. The control range may be narrowed by the use of the Temperature Limiting screws located behind the control panel.

Repositioning the screw on the left will limit the maximum temperature about 3.7°F for each hole in a clockwise rotation; the screw on the right will limit the minimum temperature when moved counter- clockwise. Limiting the maximum and minimum set- tings prevents users from turning the controls to extreme positions. Restrictions to full rotation of the thermostat knob may require explanation to the room occupant that the unit will provide comfort- able conditions at the settings allowed.

To access the limiting screws, remove the front grille, the thermostat knob and the operation knob by pulling each knob off its shaft and the control panel. (See the illustration “Fan Cycle Switch” on page 4.) Set the limiting screws to the desired set- ting, and replace the control panel and the control knobs. If the settings do not allow sufficient room temperature control, the limiting screws may have to be repositioned.

Stop link

Tapped holes (10)

Thermostat shaft

(Warmest)(Coldest)

Temperature limiting screws (location at shipment)

When the limiting screws are relocated, it is recom- mended that the screws be set no higher than the second hole from the original bottom position. This provides an operating range between approximately 58°F and 80°F. In order to maximize the benefit of the temperature limiting, it may be necessary to adjust the limiting screws seasonally, maintained at moder- ate temperatures (i.e., heating season temperatures limited between 60°F and 75°F; cooling season tem- peratures limited between 85°F and 65°F).

9

Page 8 Page 10
Page 9
Image 9
Sanyo STW-2 Series owner manual AIR Louvers, Temperature Limiting
Page 8 Page 10

STW-2 Series specifications

The Sanyo STW-2 Series is a cutting-edge line of portable solar power systems designed to provide reliable energy solutions for various applications. Known for its versatility and efficiency, the STW-2 Series caters to consumers seeking sustainable energy sources for outdoor adventures, emergency backup, and even everyday use.

A standout feature of the STW-2 Series is its high-capacity lithium-ion battery, which ensures a reliable power supply wherever you go. With a variety of storage capacities, users can select models that best fit their energy needs, from lightweight options ideal for camping trips to more robust solutions for longer excursions.

One of the most notable technologies integrated into the STW-2 Series is its advanced solar charging system. Equipped with highly efficient monocrystalline solar panels, the STW-2 can harness sunlight effectively, converting it into usable electricity even in low-light conditions. This capability enables users to recharge their devices all day long, making it especially beneficial for outdoor activities that require prolonged power use.

Additionally, the Sanyo STW-2 Series features multiple output options, including USB ports, AC outlets, and DC carports, allowing users to charge various devices simultaneously. Whether it’s powering smartphones, laptops, cameras, or even small appliances, the STW-2 is engineered to cater to diverse energy demands without the hassle of carrying multiple chargers.

The design of the STW-2 Series also emphasizes portability and durability. Built with rugged materials, the units withstand harsh outdoor conditions, making them ideal for camping, hiking, or tailgating. Lightweight and compact, they can easily fit into backpacks, ensuring that users have a convenient power source at their fingertips.

Another characteristic that sets the Sanyo STW-2 Series apart is its user-friendly interface. With an LCD display, users can easily monitor battery status, charging progress, and output levels. This accessibility ensures that individuals can manage their energy consumption efficiently.

In conclusion, the Sanyo STW-2 Series offers a powerful, sustainable energy solution tailored to meet the needs of modern users. With its combination of high-capacity storage, advanced solar technology, multiple output options, rugged design, and user-friendly features, the STW-2 Series stands as a reliable option for anyone seeking portable solar power. Whether for recreational use or emergency preparedness, the Sanyo STW-2 Series is an innovative choice in the realm of renewable energy.
Top Page Image Contents