Sanyo STW-2 Series Operating Instructions, Installation Location, Names of Parts, very dangerous

Models: STW-2 Series

1 12
Download 12 pages 15.31 Kb
Page 2
Image 2
OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

Installation Location

We recommend that this air conditioner be installed properly by qualified installation technicians in accor- dance with the Installation Instructions provided with the unit.

Before installation, check that the voltage of the electric supply in your home or office is the same as the voltage shown on the nameplate.

Names of Parts

Air outlet

Cover switch and

Rear grille

 

control panel

 

WARNING

Do not install this air conditioner where there are fumes or flam- mable gases, or in an extremely humid space such as a green- house.

Do not install the air conditioner where excessively high heat- generating devices are placed.

Air intake

Wall case

Front grille

Electrical Requirements

1.All wiring must conform to the local electrical codes. Consult your dealer or a qualified electrician for details.

2.Each unit must be properly grounded with a ground (or earth) wire or through the supply wiring.

3.Wiring must be done by a qualified electrician.

4.Never use an extention cord with this air conditioner.

Safety Instructions

Read this Instruction Manual carefully before using this air conditioner. If you still have any difficulties or prob- lems, consult your dealer for help.

This air conditioner is designed to give you comfort- able room conditions. Use this only for its intended purpose as described in this Instruction Manual.

Avoid letting cooled/heated air blow directly on your body for a long time.

WARNING

 

• Never use or store gasoline or

 

 

other flammable vapor or liquid

 

 

near the air conditioner — it is

 

 

very dangerous.

 

 

 

 

 

 

CAUTION

 

• Do not turn the air conditioner

 

 

on and off from the power

 

 

mains switch. Use the mode

 

 

selector switch.

 

 

• Do not stick anything into the

 

 

air outlet of the unit. This is dan-

 

 

gerous because the fan is rotat-

 

 

ing at high speed.

 

 

• Do not let children play with the

 

 

air conditioner.

 

 

• Do not cool or heat the room

 

 

too much if babies or invalids

 

 

are present.

 

 

 

Air Intake Air from the room is drawn into this section and passes through air filters which remove dust.

Air Outlet Conditioned air is blown out of the air con-

ditioner through the air outlet.

Control Panel and Operation Functions

Thermostat

Mode

 

 

selector

 

 

rmedi

 

Inte

ate

 

range

 

7

2°F

 

(88° F)

(55° F)

 

WARMER

COOLER

Thermostat Control

The thermostat knob is used to control the room tempera- ture. The unit automatically cycles on and off to maintain room temperature. A comfortable temperature will be maintained in most rooms when the control is set to about intermediate range.

Mode Selector

HI HEAT provides heating with high fan speed operation. LOW HEAT provides heating with low fan speed operation. OFF setting stops heating or cooling operation.

FAN provides fan operation without cooling or heating. LO COOL provides cooling with low fan speed operation. HI COOL provides cooling with high fan speed operation.

As long as power is connected to the unit, Freeze Protection always functions at any position even at OFF position.

2

Page 2
Image 2
Sanyo STW-2 Series Operating Instructions, Installation Location, Names of Parts, Electrical Requirements, very dangerous