HOW TO SET THE CLOCK

The device is equipped with a built-in clock allowing you to record your pressure readings with time and date information. Set the clock properly to keep a precise record of the time and date of your measurement results. The clock-setting procedure goes in the following order: Year/Month/Date and then Hour/Minute.

The clock has been factory preset to 12:00AM on January 1, 2004. After batteries have been replaced, the clock will indicate the time and date of the most recent measurement data in memory.

Example: Set the clock to 08:05 PM on May 1, 2004.

1 After making sure that the power is

turned off, press and hold for

more than a second.

The last figure of the Year (A.D.) will appear on the pulse display section and Month/Date will appear on the Time/Date display section.

The “Year ” blinks and then will be corrected.

2 Set the “Year”.

Press

to set the current year.

*The “Year ” can be set between 04(2004)and 33(2033).

Press .

This will finalize the “Year” setting. The digits

representing the “Month” On the date display

section will flash.

- Eng 10 -

Page 10
Image 10
Citizen CH-671F instruction manual HOW to SET the Clock, Set the Year