IBM Tivoli and Cisco manual Remediation server software setup, Prerequisites

for Tivoli Configuration Manager package at the IBM Tivoli Security Compliance Manager 5.1 Utilities page at the following link:

http://www.ibm.com/support/docview.wss?uid=swg24007082

2.The com.ibm.scm.nac.posture.PolicyCollector has to be configured with the following parameters:

–REMEDIATION_JAR equal to collectors/com.ibm.scm.nac.tcmremed.client.TCMRemed.jar

–REMEDIATION_CLASS equal to com.ibm.scm.nac.tcmremed.client.TCMRemediator

–HANDLER_ATTRIBUTES equal to

remediation.url=http://<name_of_the_remediation_server>/SoftwarePack ageServerWeb/SPServlet

In the current release all of the required files for automatic remediation are collectors and are part of the policy, so they are downloaded and maintained automatically from the Security Compliance Manager server when the policy is assigned to the client. The steps required to properly set up the client workstation are described in 6.3, “Deploying the client software” on page 189.

8.2 Remediation server software setup

To get started with the automated remediation process, we must understand the proper prerequisites before setting up the Tivoli Configuration Manager.

8.2.1 Prerequisites

To properly set up all server components required for the automated remediation, you must install additional installation media:

￿For Tivoli Configuration Manager server 4.2.3 base installation:

–Tivoli Configuration Manager Installer 4.2.3

–DB2 Version 8.2

–Tivoli Configuration Manager server 4.2.3

–Tivoli Framework 4.1.1 CD1

–Tivoli Framework 4.1.1 CD2

￿For Tivoli Configuration Manager Web Gateway installation:

–WebSphere Application Server 5.1 or later

–Tivoli Configuration Manager Web Gateway 4.2.3

358Building a Network Access Control Solution with IBM Tivoli and Cisco Systems