IBM Tivoli and Cisco manual Tivoli Security Compliance Manager setup

6.1 Tivoli Security Compliance Manager setup

Tivoli Security Compliance Manager server is an important component of the solution providing the policy management service to the client workstations. In the section below we describe the process of installing the Tivoli Security Compliance Manager server.

To perform the installation the following media are needed:

￿DB2 Universal Database 8.2

￿Tivoli Security Compliance Manager Server 5.1.1

Note: The Tivoli Security Compliance Manager Server 5.1.1 is the new base installation image, which means that you do not need any previous version to install Tivoli Security Compliance Manager. At the time we wrote this book it was also known as Version 5.1.0 Fix Pack 30. One of the important differences is the fact that now server and client installation files were divided into two separate CD images.

6.1.1 Installation of DB2 database server

DB2 Universal Database software should be included with the Tivoli Security Compliance Manager installation bundle, and it is a prerequisite that it be installed first. Follow the below steps to install the DB2 database.

Important: DB2 installation must be performed from the local hard drive or from the CD. If you try to install from a Windows shared network drive the installation will fail. Copy the installation files to the local drive instead.

1.To start the installation move to the directory where you have copied the binaries and run the setup file db2setup.exe.

126Building a Network Access Control Solution with IBM Tivoli and Cisco Systems