IBM Tivoli and Cisco manual Select Switch Management → Profiles → Port → New Figure, 321

When a client connects to a controlled port, the port is assigned to the authentication VLAN. After the client has been successfully authenticated, the port is assigned to the Access VLAN specified in the port profile or the role settings.

1.Select Switch Management → Profiles → Port → New (Figure 7-89).

Figure 7-89 New port profile

2.Enter a profile name. We used Control_20. Enter a description. Ensure that Manage this port is checked.

3.Under VLAN Settings, set the Auth VLAN ID to 120. Set the Default Access VLAN ID to 20. Access VLAN should be set to Default Access VLAN.

Chapter 7. Network enforcement subsystem implementation 321