IBM Tivoli and Cisco manual Pull, Accept the defaults and click Next

7.In the IBM Security Solution for Cisco Networks window (Figure 6-76),ensure that the box Select the checkbox to install IBM Integrated Security Solution for Cisco Networks is checked, then click Next

Figure 6-76 The IBM Integrated Security Solution for Cisco Networks window

8.In the client communication mode window, select the port on which the client listens for requests. The default port is 1950.

The client can operate in one of these communication modes:

Push This is the mode in which communication can be initiated from both sides, client and server. This is the recommended mode for workstations, as only this mode enables the client to use DHCP administered IP addresses.

Pull	In this mode the client listens for server requests, but the server
	always initiates communication sessions. This setting is useful
	for traffic across a firewall, but only for static IP addresses.

Note: Push mode is the more scalable approach. Use pull mode only when absolutely required.

Accept the defaults and click Next.

206Building a Network Access Control Solution with IBM Tivoli and Cisco Systems