41 2 8509 2
Type Edition Page
| Service |
41. Coin meter | Manual |
Alternative 2: Timed coin meter (Available only on the Swedish market)
When the coin slot with coin or token is pushed in, the slot actuates a catch which advances a wheel.
This actuates a microswitch which provides power (phase) to the automatic unit of the machine. It is now possible to start the machine.
The paid time has run out. The wheel is turned so that the microswitch cuts the phase to the automatic unit and timer motor. The washing programme is broken and the machine is emptied of its water.
If several coins or tokens are inserted simultaneously the coin meter provides power to the automatic unit for the total time that has been paid for, regardless of whether the machine is running or not. The time counting stops if the main switch is switched OFF and restart when the main switch is switched ON.
Time connected coin meters allow for the rapid advance by means of the start button. This may be required if a part of the programme cycle is to be ommitted.
Altering the running time of the coin meter – timed coin meter
•Turn the time dial manually until the
•Carefully lift off the time dial from the shaft with a small screwdriver.
•Install the new time dial on the shaft.
Possible faults and corrective measures
1.The machine is without power.
–Check fuses, including the operating fuse
–Check the connection cable
2.The coin meter mechanism does not function
–Check that the catch advances the wheel
–Check the return spring on the coin slot
–Check the catch in the relay mechanism (only applicable on program connected coin meter)
3.The microswitch is not actuated by the wheel or is defect.
–Adjust or replace the microswitch
