12. Function Sequences Service
Manual
12 Type Edition Page
Rapid advance, program selection

Program Permanent Press

When program Permanent Press is used, row 3 (10) and 4 (9) of the
program selector are closed which means that rows 3a (3) rapid advances
the timer in step 43-45 and row 1b (2) in step 17-19, which means shorter
final extraction and no cool down.

Program Cold and Hot

In these programs row 4 (9) of the program selector is closed, which means
that cool down is cut out when row 1b (2) rapid advances the timer in step
17-19.

If door is opened

If by any reason the door should be opened during operation, switch S3 (8)
is closed and the timer rapid advances to step 50 because row 2a (14) is
closed.

Shackles

The machine is supplied with two shackles mounted on the parent card,
contact X77. The shackles have the following function:
X77:3-4 (7)
Shackle closed: No cool down after main wash
Schackle cut off: Cool down after main wash
X77:5/6 (2) (see: "Water filling")
Shackle closed: High water level in pre-wash and main wash
Shackle cut off: Low water livel in pre-wash and main wash

Switch S12-S14 (Option)

The three switches S12, S13 and S14 give more possibilities to vary the
program and can be ordered separately from your dealer. The following
parts will be cut out if the switches are closed:
Switch/ Step Part Row
Shackle
S12 (11) Step 43-45 3 min shorter final extraction 3a (3)
S13 (12) Step 22-27 No first rinse 9a (4)
S14 (13) Step 11-6 No pre-wash 16a (5)
13 9010 8
1574
Sequence diagram
1b. Rapid adv. Cood down
2a. Rapid adv. Open door
3a. Rapid adv. Short spin
9a. Rapid adv. 1st rinse
15a. Rapid advance
16a. Rapid adv. Prewash