Service
Manual | 21. Automatic Unit |
13 | 9002 | 1 | 21 |
Type | Edition | Page |
Components
Fig.
1
P5 Program selector for wash program.
The selector must be set to a program position in order for the machine to start - the selector functions as a switch.
P1 Timer - controls the program sequences according to program schedule. Reverser is built in to the timer
K1 Relay, wash speed
K4 Relay, spin speed
K21 Relay, heating
S6 Push button unit – with two push buttons, one spring mechanised start button and one two position button for program selection.
H1 Signal lamp – lights when the program selector is turned to a program position. Turns off when the program selector is turned to OFF.
B1 Level switch – to monitor high and low water level. The level switch also protects the machine from dryout and spinning with water in the machine.
B11 Thermostat – controls the wash temperature by turning off the heating elements when desired temperature is reached.
1
B11
B1
P1
P5 
H1
S6
S7
K21 | K1 | K4 |
