IBM Tivoli and Cisco manual Click Add Check, 335

2.Select the following options (Figure 7-103):

–From the Check Category drop-down menu, select Service Check. The screen will refresh and the Check Type should be set to Service Status.

–Check Name should be set to SCM_Service.

–Service Name should be set to jacservice.

–Operator should be set to running.

–Check Description should be set to SCM_Service.

–Operating System should have Windows XP checked.

Figure 7-103 Security Compliance Manager Service check

3.Click Add Check.

4.Repeat steps 1 and 2, using the following information:

–From the Check Category drop-down menu, select Registry Check. The screen will refresh and the Check Type should be set to Registry Value.

–Check Name should be set to CCA_Compliance.

–From the Registry Key drop-down menu, select HKLM. The path should be entered as:

\SOFTWARE\Cisco\Clean Access Agent

Chapter 7. Network enforcement subsystem implementation 335